Steel hall and warehouse design
A hall is where design saves the most: an optimised frame can use noticeably less steel than a “safe” by-eye solution.
We calculate to Eurocode 3, draw footings, anchors and every shop detail, and coordinate the other volumes for the main design.
What you get
- Frame calculation
- Footings and anchors
- Erection drawings
- Shop drawings
- Steel schedule by weight
What we need from you
- Dimensions and height
- Use and equipment (crane, racking)
- Location
Stages and timing
| # | Stages and timing | |
|---|---|---|
| 1 | Frame concept | 2–3 days |
| 2 | Calculation | 3–7 days |
| 3 | Drawings | 5–10 days |
Common mistakes and rejection reasons
- Excess steel from an unoptimised frame
- Crane or equipment loads ignored
- Footings without soil data
FAQ
How much is a hall design?
It depends on area; for halls up to 500 m² usually €800–2,500.
Do you do the full main design?
Yes, with all volumes and review.
Can you check an existing hall?
Yes — for an extension, new equipment or legalisation.
Related services
Steel shop drawingsFor shops and welders: every part drawn, cutting list, DXF — fast.Structural designFoundations, reinforced concrete, retaining walls, roofs — Eurocode calculations and rebar drawings.Canopy & carport designCarports, terrace and entrance canopies — wind calculation and shop drawings.
Send us your task
A paper sketch, a photo or a picture from the internet — all fine. We reply within 1 hour on working days.